Operation Mode Quad LNB or 4 Multiswitch Outputs
Use this option if you want to connect your Max SX8 Basic to a normal multiswitch or LNB with integrated multi-switch (QUAD LNB or OCTO LNB). For both cases, four SAT lines are required to provide a full-featured and full reception (all four levels SAT).
Operation Mode Quattro LNB or Multiswitch cascade output (VL, VH, HL, HH)
Use this option if you want to connect your Max SX8 Basic to a multi-switch, which can be cascaded. Such multi-switch have in addition to the inputs for a Quattro LNB, four outputs which are also known as "cascade outputs". These outputs give only from a Quattro LNB received signals unaltered out again. Alternatively, the four outputs can be directly used by a Quattro LNB without multiswitch.
Operation Mode Singlecable Solution
in this operation mode the card can be used over only one antenna cable via Unicable®*1 oder JESS®*2 supported equipment. Thereby it is possible to provide up to 8 Tuners by a UniCable® System and up to 32 Tuners with a JESS® System. More than one satellite can be used in this mode (in this mode, you need for 8 tuners only 1 cable to port 1, thanks to an integrated multi-switch).
Operation mode 4 Tuner Direct
In the "4 Tuner" operating mode, the four inputs of the card can be used like individual tuners. Several satellites (DiSEqC) are supported in this mode. (In this mode you need 1 to 4 cables from a multi-switch or LNB with integrated multi-switch)
The Digital Devices MAX SX8 Basic can be used immediately with numerous TV applications.
* 1 Unicable® Requires Unicable® / SCR / CENELEC EN50494 compliant LNB or multiswitch to EN50494
* 2 JESS® Requires Jess® / CENELEC En50607 compliant LNB or multiswitch to En50607
|Anschluss via:||PCI Express|
|Digital TV Radio Empfang:||Ja|
|Einkabelbetrieb:||JESS | Unicable II (EN50607), Unicable I (EN50494)|
|Stromverbrauch:||ca. 7,5 Watt|
|Linux / Windows Treiber:|
Supported Operation Systems