 |  |
 |  |  |
 |
Digital Devices DuoFlex S2 V4A & Octopus twin CI Dual DVB-S2 HDTV PC Card for PCI Express socket with double tuner and double CI
Very suitable for extremely flat case, you need no riser cards.
CI's are also ready for MTD.
DVB-S2 high definition satellite receiver for DVB-S2 modulated channel recording in H.264 / H.265, DiSEqC 2.0 Support
DVB-S Satellite Receiver for Digital TV recording in MPEG-2 format
One Cable Solution at EN50494 (UniCable®) / EN50607 (JESS) - support driver side (Windows).
The Windows TV Software must have no UniCable® / JESS Support.
Power supply: max. 1.8 amps at 12V, LNB current max. 20 watts of power
Designed and manufactured in Germany
Bulk version (no retail packaging)
Octopus Twin CI single, for Digital Devices DuoFlex tuner and / or CI Module
Built-in double-CI and 2 ports for expansion modules DuoFlex or CI.
At this PCIe x1 Bridge you can connect up to 2 dual tuners (4 tuners).
Mixed operation with CI modules or S2 and CT modules is possible.
CI can be used with all other Digital Devices cards (Cine, DuoFlex and Max).
The connection works over the PCIe bus, assignment is via the Config Tool.
No special wiring or electricity required.
The Octopus Twin CI gets its power from the PCIe bus
Digital Devices DuoFlex S2 V4A - Dual DVB-S/S2 HDTV - Expansion board for Cine or Octopus series with newest demodulator (STV0910A - Improved compared to the version STV0910B) technology for high DVB-S2 transponder data rates up to 180 Mbits /s.
Improvements of STV0910A Demodulators
- 16 APSK, 32 APSK
- low QPSK code rates
- All streams of a MIS transponder simultaneously
- Short Frames 16KBit
- ACM and VCM
NOTE: With the expansion module, you can upgrade an existing Cine CT (V6 or higher) or Cine S2 (V5.5 or higher) to a 4 tuner card or connect to Octopus Bridge. This expansion will delivered with a full profile bracket K and a 25 cm ribbon cable.
The TV card consists of two parts, the tuner module and the Cine (S2 or CT) TV card or Octopus series. The Cine TV Card or Octopus Bridge is in this bundle not included. The Tuner module will via ribbon cable connect to a Cine Card or Otopus Bridge and has no electrical connection to the MainBoard. The Tuner Modul requires a 3,5" Floppy Power Connector. Slotbrackets for Low und Full Profile are included.
DVB-S2 receiver for high-definition DVB-S2 channel-modulated recording in H.264 / H.265 format,
DVB-S receiver for Digital TV recording in MPEG-2 format
Drivers:
Signed drivers for Windows XP/Vista/7/8/8.1/10 32/64 Bit
Windows 7/8/8.1 Media Center compatible
Drivers: Linux kernel 2.6.xx current ® Open Source
Power supply: max. 0.3 Amps at 5V (power adapter depicted in the picture is not included)
Designed and manufactured in Germany