Newsletter
 Dopravu zajišťuje
DPDPPLZásilkovna
 Události
 Online status
 Platby
Bankovní převodPayPalFio
MasterCard_newVisamasstro
ComGate
DD Max SX8 Pro (4/8) - 8 Tuner TV Card - DVB-S2/DVB-S2X Full Spectrum s integrovaným multiswitchem

Product information "8 Tuner TV Card - Full Spectrum - DD Max S8 (4/8) TV Card"

Digital Devices MAX SX8 (DVB-S2 / DVB-S2X 4/8) comes with 8x DVB-S/S2/S2X tuners on only one PCI Express card. With the Digital Devices MAX SX8 Digital Devices presents an HDTV tuner card for the PCI Express slot with eight TV tuners. The ultra-compact design, only 5 watts power consumption, the choice of operating mode and support for the single-cable solutions according EN50494 (Unicable®)*1 and EN50607 (JESS®)*2, allows a flexible use in any situation and for any solution. 

Suitable on Windows XP, Windows Vista, Windows 7, Windows 8(.1), Windows 10 and Linux, the Digital Devices MAX SX8 can be integrated by flexible selection of the operating mode individually in the environment. The operating modes allows a single-cable mode according to EN50494 (Unicable®)*1 and EN50607 (JESS®)*2, the use of quad LNBs and 4 lines from multi-switches and Quattro LNB's or master output of a multiswitch.
 

Operation Mode Quad LNB or 4 Multiswitch Outputs

Use this option if you want to connect your Max SX8 to a normal multiswitch or LNB with integrated multi-switch (QUAD LNB or OCTO LNB). For both cases, four SAT lines are required to provide a full-featured and full reception (all four levels SAT).

Operation Mode Quattro LNB or Multiswitch cascade output (VL, VH, HL, HH)

Use this option if you want to connect your Max SX8 to a multi-switch, which can be cascaded. Such multi-switch have in addition to the inputs for a Quattro LNB, four outputs which are also known as "cascade outputs". These outputs give only from a Quattro LNB received signals unaltered out again. Alternatively, the four outputs can be directly used by a Quattro LNB without multiswitch.

Operation Mode Singlecable Solution

in this operation mode the card can be used over only one antenna cable via Unicable®*1 oder JESS®*2 supported equipment. Thereby it is possible to provide up to 8 Tuners by a UniCable® System and up to 32 Tuners with a JESS® System. More than one satellite can be used in this mode (in this mode, you need for 8 tuners only 1 cable to port 1, thanks to an integrated multi-switch).
 

  • DVB-S/S2/S2X tuner
  • 4 satellite-inputs
    up to 8 multi-standard demodulators
  • S2X Features
  • Short Frames
    Long Frames
    ACM (Adaptive Coding and Modulation)
    VCM (Variable Coding and Modulation)
    MIS (Multiple Input Streams)
    Annex M 2)
    Channel Bonding (S2X) 2)
    Maximum baudrate of 500 MBit/s
    up to 2 slices
    Maximum DVB-S2/S2X LDPC-baudrate for all 8 tuners: 720 MBit/s.
    2) not implemented yet due lack of testability
  • Symbolrates
  • QPSK:
    ~95 1)
    MSym
    8PSK/8APSK:
    86 1)
    MSym
    16APSK:
    64.5
    MSym
    32APSK:
    51.6
    MSym
    64APSK:
    43
    MSym
    128APSK:
    36.85
    MSym
    256APSK:
    32.25
    MSym
    Annex M:
    500
    MSym
    1) Symbolrates have been tested up to 85 MSymbols/s
  • Sensitivity (@25MSym):
  • QPSK 11/45:
    -89 dBm
    ( 20 dBµV )
    QPSK 1/2:
    -86 dBm
    ( 23 dBµV )
    8PSK 9/10:
    -77 dBm
    ( 32 dBµV )
    256APSK 3/4:
    -69 dBm
    ( 40 dBµV )
  • Additional features
  • Strong signal immunity: > 106dbµV (-6dBm)
  • Isolation: 65dB – 80dB depending on signal strength
  • DiSEeqC 2.0 Support
  • Unicable® SCR / Cenelec EN50494
  • Supports up to 8 tuners with just one antenna cable using Unicable®/ SCR / CENELEC EN50494 compliant LNB or multi switch
  • JESS© / Cenelec EN50607
  • Supports up to 32 tuners with just one antenna cable using CENELEC EN50607 compliant LNB or multi switch
  • PCIexpress
  • Connection via PCIe x1 up to x16 slot
  • GT-Link Port
  • To connect to Octopus NET (Datarate > 1GBit)
  • Make use of PCIexpress or GT-Link Port
  • Support of many TV applications
  • Green IT
  • Power consumption of ~ 7 Watts
  • No tantal capacitors
  • No electrolyte capacitors
  • Supported operating systems
  • Microsoft Windows® XP/7/8(.1)/10
  • Linux (Kernel 2.6.34 and higher)
  • Satellite characteristics
    • Modulation
    • QPSK
    • 8PSK/8APSK-L
    • 16APSK/16APSK-L
    • 32APSK/32APSK-L
    • 64APSK/64APSK-L
    • 128APSK
    • 256APSK/256APSK-L
  • LNB Power: 4 * max. 19V, 1A pulse current, 500mA continuous current overcurrent protection short-circuit protection
  • L-Band: 950 MHz to 2150 MHz
  • DVB FEC: (Auto Spectral Detection)
  • DiSeqC support
  • Standard connectors
  • PCIexpress
  • L-band input connector (support possible required, requires power supply to LNB)
  • 20-pin socket for flat-ribbon cable to connect to Octopus NET
  • Security
  • produced und developed according to European standards, DIN EN ISO 9001:2000
  • Unicable compliant
  • SCR / Cenelec EN 50494 (Unicable®)
  • Green IT
  • RoHS compliant
  • WEEE DE 99353762
  • Power consumption
  • PCIexpress compliant
  • ≈ 7 watts without LNB current
  • Supported operating systems
  • Linux (Kernel 2.6.34 and higher)
  • Microsoft Windows® XP (SP3)
  • Microsoft Windows® Vista
  • Microsoft Windows® 7 (32/64 Bit) (incl. Windows® Media Center)
  • Microsoft Windows® 8 (32/64 Bit) (incl. Windows® Media Center)
  • Microsoft Windows® 10 (32/64 Bit)
  • System requirements
  • Dual Core Intel® or AMD® CPU
  • 512 MB RAM
  • 1x PCIe slot (x1 up to x16)
  • Dimensions
  • H 104 mm, L 111 mm, D 15 mm
(we reserve the right to change the description and specifications without prior notice)